Recycling of water – greater effect in less time

Efficient cleaning of sewer pipes requires significant amounts of water. Besides the consequences in connection with supply and costs, a high level of water consumption means that regular sewer cleaning tankers must go back and forth between the hydrant and the work site several times a day. Practically, this means that you spend three times as much time on refilling and driving as on the cleaning itself.

Three times better efficiency

pic

With a RECycler, where the water is sucked up from the sewer pipe again, strained of sludge and recycled for cleaning, the RECycler is able to yield efficient high-pressure cleaning with up to three times better use of the unit than with a regular sewer cleaning tanker. The environmental strain is also decreased because you only have to drive once a day with a full load from the hydrant instead of up to 3-4 times with a regular sewer cleaning tanker.


• Recycling of water means greater efficiency and lower costs.
• A larger number of cleaned metres per day through more efficient cleaning with a larger amount of water because there are no limits to how much water you use because the unit is designed for continuous operation.
• Completely self-sufficient and fully automatic water cleaning system.
• Decreased environmental strain and lower costs due to lower fuel and water consumption.
• Longer efficient working hours due to less time spent on driving and refilling.
• Level controlled cleaning filter built into the sludge tank ensures full use of the tank capacity.
• Flexibility. Can also be used as a regular sewer cleaning tanker for both large and small jobs besides as a RECycler.

The RECycler concept

With a RECycler you have a flexible high-tech tool. The unit is especially developed for carrying out heavy jetting jobs in which the fully automatic cleaning process ensures continuous recycling of the jetting water. In addition to its primary function as a recycling unit, the RECycler may also work as a regular sewer cleaning tanker for large and small jobs.

This flexibility makes the RECycler particularly suitable for all types of applications within this line of business.

The basic recycling unit is developed according to the same principles as our FlexLine and it is thus based on our well-tested sewer cleaning machine.

The RECycler concept has been developed with focus on work environment, functionality, design, economy and of course quality.

Tank/partition
The tank is divided into two compartments: One compartment for water and one compartment for raw sludge. A movable partition is mounted in the tank. The partition is moved by means of vacuum or pressure from the compressor. The partition has 3-4 pre-set positions.

Water cleaning process
Simultaneously with the high-pressure operation, the used jetting water is led back into the tank together with the liberated particles. The polluted water is pumped out of the sludge tank and will then go through a continuous three-step cleaning process which ensures the supply of jetting water in order to continue working without any interruptions.

pic

Our RECycler is equipped with the following equipment:

• A fully automatic three-step recycling unit consists of a level controlled strainer filter mounted in the sludge tank, cyclone filters mounted at the side of the tank and a rotating strainer filter mounted in the water tank.
• High-pressure pump working at 390 litres/min. at 140 bar.
• A large jetting hose reel mounted at the back. This hydraulically operated hose reel is equipped with at least 150 m of 1 1/4" jetting hose.
• A small hose reel at the rear. This hose reel is also operated hydraulically and is equipped with 60 m 3/4" and 50 m 1/2" jetting hose. This is ideal for very small pipes with difficult access or bends. Also used for general wash down of manholes, gullies etc.
• Vacuum pump that runs at a minimum 26,667 litres/min. A float ball combined with a cyclone filter protects the vacuum pump.
• A PLC control which ensures soft start of pumps as well as control of rpm, water pressure and the fully automatic recycling process.
• The PLC control thus lowers the fuel consumption.
• Multiple jet end for all applications including on board root cutters.
• ญญ5” fully automatic cassette system with telescopic arm and lift.
• Extra cassette reel with 50m of 3” suction hose minimizing delay/stoppages.
• Reversing camera for safe manoeuvring around sites.
• Fully automatic end cover.

pic

A new addition to this department is a high specification jetting/suction RECycler unit. This has the capability of providing our customers with the most environmentally friendly jetting service.

Oneline Environmental strives in offering its clients with the best services with most competitive rates. The RECycler is far more beneficial to our customers due its productivity.

Flexibility
The RECycler is not limited to just jetting; other works such as tank cleaning and wet well cleaning are all easily taken in its stride with the benefit of leaving all liquid residues within the sewerage system. Our high specification Flexline units compliment the RECycler without the facility of constantly recycling its jetting water.

Please contact us for more information on rates.